Polaris RZR PRO R 4 User Manual

3.38
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
ENGINE MOUNT INSPECTION
IMPORTANT
Before replacing any engine mount due to suspected
fluid loss, verify that the source of the fluid is the engine
mount, not the engine or accessories.
1. Install a commercially available engine hoist and
raise the engine slightly.
2. Observe the engine mount while raising the engine.
Raising the engine removes the weight from the
engine mount and creates slight tension on the
rubber.
3. Replace the engine mount if the engine mount
exhibits any of the following conditions:
• The hard rubber is covered with heat check cracks.
• The rubber is separated from the metal plate of the
engine mount.
• The rubber is split through the center of the engine
mount.
• The engine mount is leaking fluid.
4. For engine mount replacement, refer to ENGINE
MOUNT REPLACEMENT procedure.
ENGINE / COOLING SYSTEM

Polaris RZR PRO R 4 Specifications

General

Brand	Polaris
Model	RZR PRO R 4
Category	Offroad Vehicle
Language	English