Polaris Virage TX 2000 Service Manual

ENGINE
Disassembly/Inspection - Polaris Engines
12 .Remove spark plugs.
13 .Remove starter housing by removing remaining 3
bolts in housing. Tap housing lightly to break seal.
14.Inspect condition of crankshaft seal in housing.
Always replace seal when rebuilding engine. See
Engine Assembly for seal replacement procedure.
15 .Remove water outlet manifold. Clean and inspect
gasket surfaces. Note location of water outlet
manifold and orientation of cylinder heads (cylinder
head covers).
3/00
4.18
Polaris Sales Inc.

Polaris Virage TX 2000 Specifications

General

Brand	Polaris
Model	Virage TX 2000
Category	Boat
Language	English