Polaris Virage TX 2000 Service Manual

ENGINE
Thermostat and Coolant Filter - Polaris Engines
Exhaust Coolant Filter - Polaris Engines
The exhaust coolant filter is located on the top of the ex
haust manifold. This filter traps debris that would other
wise enter the exhaust hose cooling orifice. This ensur
es the proper exhaust temperature for cooling and
performance.
Cleaning Procedure
1 . Loosen clamp and remove hose from fitting.
2 . Using a deep well 9/16" socket or flare nut wrench,
remove fitting from exhaust manifold.
3 . Inspect fitting for plugging. Flush with water to
clean.
4. Reinstall fitting into exhaust manifold. Tighten
securely.
5 . Reinstall bleed hose and clamp. Tighten securely.
Orifice Size:
Pro 1200.SLX.
Virage TX:
.070" (1.8mm)
Fitting
Exhaust Pipe
Orifice
Exhaust
Pipe
All Engines - Screen Cleaning
y.
Flow
If particles are inside screen, replace fitting
T
Welding
Tip Cleaner
Polaris Sales Inc.
4.49
3/00

Polaris Virage TX 2000 Specifications

General

Brand	Polaris
Model	Virage TX 2000
Category	Boat
Language	English