Inserting a SMC (not included)
Turn off the camera and open the SMC slot cover as illustrated. Insert
the SMC ensuring the card is inserted the correct position as illustrated.
On the inner side of the SMC slot cover, there is a diagram showing the
proper insertion orientation.
Notched corner
of SMC card
NOTE:
The camera will turn off automatically if you insert the SMC card while the
camera is turned on.
Removing the SMC (not included)
To remove the SMC, turn off your camera , open the SMC slot cover,
gently push the SMC inwards and then release it for the SMC to eject.
Take the SMC out and close the card slot cover.
To Next Page
Loading...
Need help?
General
