Table 2-3 Poly Studio E60 LED behaviors (continued)
Standby LED behavior Power LED behavior Device status
Flashing orange, then turning to solid Solid white The device wakes up from standby
Video is not streaming
Solid orange
Flashing white Firmware is updating
Use the Poly Studio E60 privacy cover
The Poly Studio E60 camera comes with a physical cover that blocks the camera lens to protect your
privacy.
Figure 2-4 Poly Studio E60 privacy cover
1. Manually remove the privacy cover before starting your video conference to show your video.
2. Optional: Replace the privacy cover to cover the camera lens when not in use.
Basic tips for great video conferences
Use the following basic tips and guidelines to enhance or improve your experiences during video
conferences.
● Mount and position the camera so that your eyes are level with the top third of your screen and
your face appears in the middle area of the video stream.
● Avoid wearing bright colors, all-light or all-dark clothing, or very busy patterns like small checks or
narrow stripes. Light pastels and muted colors look the best on the screen.
● Preview your video stream before you join a meeting to make sure that you don’t have shadows
on your face and that your camera settings are configured correctly.
6
Chapter 2Getting started
To Next Page
Loading...
Need help?
General
