PolyScience Chiller User Manual

110-240 35
Turbine Pump (50Hz)
Model: Rfg = Refrigerating Only
Rfg / Htg = Refrigerating & Heating
Model Type Rfg Rfg / Htg Rfg Rfg / Htg
Operating Temperature -10° to 40°C -10° to 70°C -10° to 40°C -10° to 70°C
Compressor 3/4 HP 1 HP
Cooling Capacity @ 20°C
10°C
0°C
2200 watts 7513 BTU/hr
1500 watts 5123 BTU/hr
975 watts 3329 BTU/hr
2650 watts 9050 BTU/hr
1900 watts 6489 BTU/hr
1200 watts 4098 BTU/hr
Flow Rate @ 0 psi 2.9 gpm / 11 lpm 2.9 gpm / 11 lpm
Pump Pressure (adjustable)
20 to 83 psi
138 to 572 kPa
20 to 83 psi
138 to 572 kPa
Reservoir Capacity 1.1 gal / 4.2 liters 1.1 gal / 4.2 liters
Dimensions (L x W x H)
27.6 x 14.5 x 22.6 in.
70.2 x 36.8 x 57.5 cm.
Shipping Weight
197 pounds
89 kg
199 pounds
90 kg
240 V, 50 Hz
Volts Range
Over Voltage
198 to 264V
Category II
Amps 11.9A 12.2A 12.2A 12.5A
Specifications subject to change without notice.
Notes: Refer to the serial number plate on the rear of the Chiller for model and electrical data.
Cooling capacity (watts x 3.41) = BTU/hour. Performance specifications determined at ambient temperature of 20°C (68°F).
Positive Displacement Pump Models: External pressure reducing assembly (Cat. No. 060302) steps down high outlet pressure to 10
to 45psi.
Environmental Conditions Indoor use only
Maximum Altitude: 2000 meters
Operating Ambient: 5° to 30°C
Relative Humidity: 80% for temperatures to 30°C
Installation Category: II
Pollution Degree: 2

PolyScience Chiller Specifications

General

Brand	PolyScience
Model	Chiller
Category	Chiller
Language	English