PowerMate
Operation Manua
Additional Tips for Operating the M-Series PowerMate
To enjoy "Trouble Free" PowerMate operations, remember the
following:
1. Keep the battery fully charged.
2. Follow the maintenance schedule and especially keep the screw clean and oiled with
light machine oil.
3. PowerMate
®
equipment is designed to take advantage of balance and leverage
principles. Work performed will be easier and safer when the load is maintained in a
balanced position. The operator should locate the center of gravity position of an
unfamiliar load prior to undertaking lifting or lowering operations.
4. New operators should be trained on light loads not exceeding 400 lbs. (182 kg),
progressing to heavier loads after gaining experience.
5. Never unstrap a load with the wheels up.
6. No not compress the top or bottom red bumpers on the drive screw when the unit has
a load.
7. Never lay the PowerMate
®
unit down on the battery box when transporting.
8. Ensure the overide bearing is properly adjusted on the drive screw.
9. Keep nuts and bolts tight on the dolly attachment and the hook bar.
10. Keep both hands on the handles when operating the PowerMate
®
.
11. When climbing stairs, keep the wheels at the back of the stair tread and the heel of the
machine back a safe distance from the step edge.
12. It is essential for reliability, and to conform with current Health and Safety legislation,
that your PowerMate
®
is maintained regularly. We recommend a bi-annual Service
Agreement with L P International. Inc.
PN 010370 Rev.E
Eng. 05/ 08/ 14
3.06
To Next Page
Loading...
Need help?
General
