The PowerMate
products use graphical symbols, safety colours, and signal words
throughout the Operators Manual and on the units themselves. Operators using the
PowerMate
®
must familiarize themselves with these symbols.
NOTICE: The signal word to address practices not
related to personal injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor
or moderate injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death
or serious injury.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
Safety Alert Symbol: This symbol indicates a potential personal
injury hazard. Safety information following
this symbol must be followed to avoid
possible injury or death.
HAZARD GRAPHICAL SYMBOLS
SAFETY LABEL MAINTENANCE
Safety of the operator and surrounding environment must be considered at all times.
To that end, safety labelling on the PowerMate
®
must be maintained to provide
legible safety information. Clean the labels with soap and water. Do not use solvent-
based cleaners because they may damage the labels. Replace damaged or missing
labels. Replacement labels may be purchased from L P International Inc. Customer
Service Phone number 1-800-697-Mate.
PowerMate
Operation Manua
2.01
PN 010090 Rev.E
Eng. 05/ 08/ 14
To Next Page
Loading...
Need help?
General
