PowerTech PW200 User Manual

INSTRUCTIONS PW150/PW200
16
3). The gap between the bottom of electric latch and the stopper should be less than 7mm. See Figure 3.3.7 (10)
4). Connect the wires of the electric latch to the terminal LATCH and GND on the PCB.
Figure3.3.7(10) For the gate opened inward. Figure3.3.7(11) For the gate opened Outward.
7mm 7mm
4) Technical Characteristics
4.1/4.2 PW150 / PW200
Motor
Gear type
Thrust
Stroke length
Power supply
Maximum operating current
Maximum gate weight
Maximum gate length
Duty cycle
Operating Temperature
Dimension
Weight
24Vdc motor with mechanical release
Worm gear
1500N
360mm
24Vdc
4.2A for maximum 10 seconds.
150 kg per leaf
2 meters
20%
-20℃~+50℃
674mm * 98mm * 170mm
3.1kg
24Vdc motor with mechanical release
Worm gear
2000N
400mm
24Vdc
4.2A for maximum 10 seconds.
200 kg per leaf
2.5 meters
20%
-20℃~+50℃
799mm * 98mm * 170mm
3.6kg
PW150 PW200
4.3 PH-1 Photocells
Detection type
Operating distance
Response time
Input voltage
Operating Temperature
Protection class
Dimension
Through beam
30 meters
100ms
AC/DC 12~24V
-20℃~+60℃
IP66
59mm * 87mm * 38mm
4.4 PKS-1 Key Selector
Application
Installation
Operating Temperature
Dimension
For outdoor use
Wall mounted vertically
-20℃~+50℃
85mm*60.5mm*40.5mm
4.5 PPB-1 Push Button
Application
Installation
Operating Temperature
Dimension
For outdoor use
Wall mounted vertically
-20℃~+50℃
85mm*60.5mm*40.0mm

PowerTech PW200 Specifications

General

Brand	PowerTech
Model	PW200
Category	Gate Opener
Language	English