ADJUSTING THE BACKREST
To adjust the position of the UeftBackrest (35), Uoosen
the Adjustment Knob (69) and disengage it from the
Backrest Frame (19), Move the Backrest to the
desired position, Reengage the Knob into the
Backrest Frame and rstighten the Knob into the Left
Upright (8), Make sure the Knob is fulty tightened.
ADJUSTING THE SEATS
To adjust the position of the Large Seat (37), Uoosen
the Adjustment Knob (69) and disengage it from the
Right Seat Frame (17), Move the Seat to the desired
position, Rsengags the Knob into the Seat Frame
and retighten the Knob into the Right Seat Upright
(11), Make sure the Knob is fulty tightened.
The Small Seat (not shown) can be adjusted in the
same manner.
ATTACHING THE CURL PAD
SHde the CurUPost (16) into the CurUPost Upright
(10) and secure it at the desired height with an
Adjustment Knob (69), Remove the CurUPad (38)
from the weight system when performing an exercise
that does not require it,
LOCKING THE WEIGHT STACK
Lock a weight stack by inserting a Lock Pin (78)
through a Weight Guide (30) and securing the Lock
(77) onto the Lock Pin,
11
\
25
To Next Page
Loading...
Need help?
General
