PROLiNK Hurricane 5200C User Manual

PROLiNK Hurricane 5200C/5201 ADSL2+ Modem / Router
User Manual
Page 43 of 59
(write-only)
operation to the objects defines as read-writable in the MIB.
Function buttons in this page:
Apply Changes
Save SNMP configuration. New configuration will take effect after saving into flash memory
and rebooting the system (See section “Admin” for details).
9.4 PORT MAPPING
The modem/router provides multiple interface groups and there are up to five supported
groups, including one default group. The LAN and WAN interfaces could be included.
Traffic coming from one interface of a group can only be flowed to the interfaces of the
same group. Thus, the modem/router can isolate traffic from group to group for some
application. By default, all the interfaces (LAN and WAN) belong to the default group, and
the other four groups are all empty. It is possible to assign any interface to any one group.

PROLiNK Hurricane 5200C Specifications

General

Brand	PROLiNK
Model	Hurricane 5200C
Category	Network Router
Language	English