5
EN
Listening to FM
Change stations
To change stations, press the Stations button, then rotate the Navigation dial
When listening to FM there are two tuning modes, Manual and Seek (default):
Manual Rotating the Navigation dial tunes down or up in steps of 0.05 MHz
Seek Rotating the Navigation dial scans to the next/previous station.
By default, Chronos iDock is set to Seek.
To change the tuning mode, press Menu when listening to FM and select ‘FM tuning mode’.
FM Stereo mode
"$<7i
2[PbbXRP[\dbXR
&($<7i
BRP]]X]V
5<cd]X]V\^ST
<P]dP[Cd]T
Select Stereo (default) or Mono signal mode − mono may improve audio clarity where stereo
signals are weak.
To switch between FM Stereo and Mono modes, Press Menu and select ‘FM stereo mode’.
5<bcTaT^\^ST
<^]^
Change the information shown on-screen
Chronos iDock can display different information relating to the FM station you are listening to.
To change the information shown:
1. Press Menu and select ‘Display’.
2. Use the Navigation dial to cycle through the following options:
Radio Text Scrolling text and information broadcast by the station.
Date The current date.
Autotune
If you lose a station signal, or wish to update your station list, you can perform an Autotune
to retune all DAB stations. Press the Menu button, then scroll to and select ‘Autotune’. Push
the Navigation dial to confirm
To Next Page
Loading...
Need help?
General
