Pyronix Enforcer 32-WE Wireless Setup Guide

Enforcer 32-WE Wireless Setup Manual
Page: 16
9.2 MC2-WE
The MC2-WE is Two Way Wireless magnetic contact / universal transmitter with 2 reed / 1 input and
tamper input.
9.2.1 Learning / Diagnostics / Installation
9.2.2 Installation Notes
It is recommended the MC2-WE is learned at the control panel. A signal strength test should then
be performed to make sure the most suitable location is chosen, ensuring optimum wireless
range.
9.2.3 Installation Surfaces
NOTE: The MC2-WE can be mounted on typical building materials; such as wood, PVC, brick or
metal etc. If you do encounter any problems with different surfaces, please contact
customer.support@pyronix.com
LEARN WIRELESS
DEVICES?
Learn Devices?
Control Inputs?
Input 01
Available [01]
Learning...
Input Learnt!
CHANGE INPUTS?
Input Type [07]
Final Exit
Input Active In
[ABCD]
LEARN
DIAGNOSTICS?
START
View Wireless
Device Status?
Signal Strength?
Inputs?
3---------------
----------------
LEDs
LEDs
T C Z
T C Z
TAM P E R AL A R M
N/CN/C
NOTE: The use of external inputs will make the
system unable to comply with EN50131-1
S2
Enable
S1
Enable
S2
Enable
S1
Enable
Input [01]
Input 01
>10m
>5s
5s
≤300s
10m

Pyronix Enforcer 32-WE Specifications

General

Brand	Pyronix
Model	Enforcer 32-WE
Category	Security System
Language	English