Pyronix Enforcer 32-WE Programming And Installation Manual

Page: 45
Appendix A. Defaults
Engineer Menu’s
Clean Start 2000
(Ungraded)
Clean Start 2020
(PD6662 EN Grade 2)
SOFTWARE REVISION
CHOOSE MODE
EOL Range 4k7/2k2 [1]
EOL Mode DR [1]
Input Response 300ms
INSTALL ZEMs
ZEM Address No [0] (for all ZEM addresses)
WIRELESS DEVICE CONTROL
Control Inputs
Control Bells
Program Keyfob Buttons
Lock [1] Set Area [2]: Area A
Unlock [2] Unset Area [3]
I [3] Set Area [2]: Area B
II [4] Show Status [1]
Lock + Unlock [5] No Action [0]
I + II [6] Hold up [6]
Lock + I [7] No Action [0]
Unlock + II [8] No Action [0]
CHANGE INPUTS
Inputs All inputs unused
Input Area A (if input programmed)
Input Attributes
Chime No [0]
Omittable No [0]
Double Knock No [0]
Normally Open No [0]
Confirm Group [00]
Input Description
Enter Name Input 01
Enter Location _
ASSIGN KEYPADS/READERS
Address
Address [0]: Keypad [1]
Addresses [1]-[3]: Unused [0]
Default Level Default Level [A ]
Set Point Description
Enter Name Device 0
Enter Location
If programmed as Reader:
Reader Is: Set Point [0]
If programmed as Reader, Entry
Control or Access Control
Lock Open Time [005]
Door Open Time [010]
SYSTEM DISPLAYS
Area A Text Full Set
Area B Text Night Set
Area C Text Area C
Area D Text Area D
Sign on Message Enforcer 32-WE
Site Name _
Display When Set No [0]
Display Alarms No [0]
Display Hus No [0]
Display Inputs No [0]
CHANGE TIMERS
A, B, C, D: Entry Time [030]
A, B, C, D: Exit Time [020]

Pyronix Enforcer 32-WE Specifications

General

Brand	Pyronix
Model	Enforcer 32-WE
Category	Security System
Language	English