17
ENFORCER V11 EXTENDED USER GUIDE
Button Actions
Each wireless keyfob has four buttons that can be programmed for any of the following functions.
No Action
Disables the button.
Show Status
Prompts the LED on the keyfob to indicate whether the system is armed or disarm.
Set Area
Arms the chosen area(s)
Unset Area
Disarms the chosen area(s)
Operate Output
Triggers an output on the panel (programmed by Engineer)
Flexi-set
Flexi-set allows you to choose which level/area to arm if a user code or tag is assigned to one or more levels/areas. If
this function is disabled, when a user code is entered or proximity tag presented, the system will automatically arm
the levels/areas that the user is assigned to.
Please note: Any proximity tags used on a standalone tag reader must have exi-set set to ‘No’.
Adding a New User
Press b or h to scroll to ‘EDIT USERS?’.
Press f.
EDIT USER?
To add a new code, tag, or keyfob press f. Press h to
delete or change a user code (see further down for details).
Add New User?
Press [ or ] to choose a user number. Press f.
Empty [01]
Enter the new code, present a tag or press and hold a keyfob
button until the display changes. Once ‘asterisks’ appear, the tag
or user code will be now assigned to this user. Press f.
Enter User Code
[******]
To Next Page
Loading...
Need help?
General
