Pyronix MATRIX 6 User Manual

Matrix 6/816 User Manual
Page 2 RINS545-7
1.2 Keypad Display
Rest Of The World Denmark, Finland, Norway & Sweden
Illuminated Correct AC & DC power sources AC power is OK
Blinking Indicates DC source (battery) fault Indicates an AC fault
Supply
Extinguished
Indicates AC fault / no power to panel
No power to the panel
Illuminated OK to arm, no open zones
Blinking Programming function is active
Ready
Extinguished One or more zones are open
Illuminated In log / FTA mode – zone activation
Slow Blinking Active alarm in FTA mode
Fast Blinking A latched alarm or fault needs clearing – View the Log
Alarm
Extinguished No active alarms
Illuminated Indicates a tamper condition (used in log display)
Blinking Indicates a tamper condition in FTA mode
Tamper
Extinguished No active tamper alarms
Illuminated Indicates a PA alarm condition (used in log display)
Blinking Indicates a PA alarm condition in FTA mode
P.A.
Extinguished No active PA alarms
Illuminated Indicates a fire alarm condition (used in log display)
Blinking Indicates a fire alarm condition in FTA mode
Fire
Extinguished No active fire alarms
Illuminated Indicates a system fault
Blinking Keypad is in Engineer mode
Fault
Extinguished No active faults
Illuminated The panel is armed
Blinking Indicates the panel is arming with one or more omitted zones
Armed
Extinguished The panel is disarmed
Illuminated The panel is disarmed
Blinking Keypad is in user menu mode
Disarmed
Extinguished The panel is armed

Pyronix MATRIX 6 Specifications

General

Brand	Pyronix
Model	MATRIX 6
Category	Control Panel
Language	English