Pyronix MATRIX 6 User Manual

Matrix 6/816 User Manual
RINS545-7 Page 3
1.3 Common Keypad Indications
Disarmed Mode
The premises are not armed. All
zones are closed (detectors are
not activated). System is ready to
be armed.
Disarmed Mode
The premises are not armed.
There are open zones. For
example, Zone 6. The syste
m is
not ready to be armed
Armed in Arm Mode A
For example, fully armed mode,
when all the premises is armed.
Armed in Arm Mode B
For example, partly armed, when
only part of the premises is armed
Armed in Arm Mode C
For example, partl
y armed, when
only part of the premises is armed
Armed in Arm Mode D
For example, partly armed, when
only part of the premises is armed
Armed + Alarm
The number of the zone in alarm
is displayed. For example, Zone 2
is in alarm.
First To Alarm Mode
The cause of the first alarm event
will be displayed after entering
the user code. For example, Zone
2 in alarm.
User Mode
This mode gives access to user
operations.
Engineer Mode
This mode is for system
configuration programming and
sh
ould only be used by a qualified
engineer.

Pyronix MATRIX 6 Specifications

General

Brand	Pyronix
Model	MATRIX 6
Category	Control Panel
Language	English