Pyronix Matrix 832 User Manual

Matrix User Guide
Page 6 RINS915-2
3.5 Key fob Symbols and Meanings (KF4DW)
3.5.1 The KF4DW Actions
Action Description
Arm Mode A Arm the panel in Arm Mode A
Arm Mode B Arm the panel in Arm Mode B
Arm Mode C Arm the panel in Arm Mode C
Arm Mode D Arm the panel in Arm Mode D
Disarm Disarm the panel (if currently armed or in First to Alarm)
RKP Controlled Output RKP controlled output*
Keyfob Controlled Output Keyfob controlled output*
Fire Alarm Creates a Fire Alarm
Medical Alarm Creates a Medical Alarm
Personal Attack Creates a Personal Attack
Not Used No Action
Quick Arm Mode A Quick arm part set A**
Quick Arm Mode B Quick arm part set B**
Quick Arm Mode C Quick arm part set C**
Quick Arm Mode D Quick arm part set D**
*Note 1: Key fob Controlled is a new programmable output type that can be only be assigned to key fob button
presses.
*Note 2: Quick arm is a new arming method. It does not display open zones whilst arming.
All programmed button actions are on a per partition basis. This means that Partitions 1, 2, 3 & 4 can have
totally different sets of button actions from each other. This also means that key fobs assigned to users will only
be active in one partition (the first partition if assigned to multiple partitions).
3.5.2 STATUS LEDS
The status LED on the key fob shows the status of the panel when any arm or disarm button is pressed. The
indications are shown below:
Panel Status LED Indication
Disarmed
Green for 3 seconds
Arming
Toggles Green/Red in 3 second bursts until armed
Armed
Red for 3 seconds
In Alarm
Flashing Green for 3 seconds
In FTA (First To Alarm)
Flashing Green for 3 seconds
Status LED
LOCK Button
(Button 1)
I Button
(Button 3)
UNLOCK Button
(Button 2)
II Button
(Button 4)

Pyronix Matrix 832 Specifications

General

Brand	Pyronix
Model	Matrix 832
Category	Control Panel
Language	English