Pyronix Matrix 832 User Manual

Matrix User Guide
Page 10 RINS915-2
3.9.2 Icon Keypad
As well as the P1 – P4 icons, partition information is shown on the 7-segment displays, as this is easily visible
from a distance. Each of the two corner segments are assigned to a partition as shown below.
Partition 1 Partition 2
Partition 3 Partition 4
P1 P2
P3
P4
Single Partition Indications
The following displays are shown on the Icon keypad when the keypad is used to arm or disarm the panel when
configured as a single-partition system.
Disarmed In Alarm
The DISARMED and
OK icons are
displayed.
The panel is ready for
arming.
The last open zone
number is displayed.
(Zone 1)
Arming First To Alarm (FTA)
The DISARMED and
OK icons are
displayed.
The panel is arming in
arm mode A
(( ))
The BELL icon
flashes.
Zone 1 was the First
zone To Alarm (FTA)
Armed Arming with Omits
The ARMED icon is
displayed.
The panel has armed
in mode A
The armed icon
flashes indicating
that the panel is
arming with omitted
zones.
Anti-Code Reset / Engineer Reset
(( ))
P1
(( ))
Partition 1 segments flash
alternately as shown.

Pyronix Matrix 832 Specifications

General

Brand	Pyronix
Model	Matrix 832
Category	Control Panel
Language	English