Matrix User Guide
RINS915-2 Page: 9
3.9 Partition Indications
If your alarm panel has been configured at install time to have more than one partition, you may display single
or multiple partition information, depending on a variety of options programmed by your installer. If your keypad
has been configured for a single partition use only, then you will not display partition information, except in anti
code reset.
3.9.1 LCD Keypad – Multiple Partitions
The following status will be displayed for each partition of a common keypad, assuming hidden display mode is
not active:
I
Alarm
%
Arming ! Arming With Omits
&
Armed # Reset Required
All partitions are disarmed Partition 1 is arming or selected to be armed
Partition 1 is armed Partition 1 in alarm condition
Partition 1 Engineer / Anti-code reset required Partition 1 arming with omits
To Next Page
Loading...
Need help?
General
