17
4
2 ACCESS LEVELS
Limited User level enables: 1. Panel setting and unsetting with a unique
pass code.
2. Setting and unsetting of the door chime
facility.
3. Event log viewing.
Master User level enables: 1. All Limited User facilities.
2. Alteration of both Limited User and Master codes.
3. Walk test facility for all four set modes.
4. Clearing of event log (if allowed by the
Engineer).
5. LED / Strobe / Bell / Internal Speaker test
facility.
3 FEATURES
- 3 Access-Level Codes, all programmable
- Easy-set facility
- 6 Programmable alarm zones
- 4 Set / Part Set modes
- Fire alarm zone with unique alarm sound
- Personal Attack alarm zone
- Tamper zone
- 16 key backlit keypad
- Dedicated Personal Attack key on keypad
- Dedicated Fire alarm key on keypad
- 18 Event Memory Log with forward and backward scroll
- Selectable Master or Engineer Log reset
- 7 Segment LED display for reading Event Log and zone programming
- 8 LEDs for immediate indication of panel status
- Independent Walk Test facilities for each Set / Part set mode
- System Test Function
- Built in sounder with volume control and software override
- Optional remote keypads with internal sounders
- Programmable from any remote keypad
- Separate Bell and Strobe lamp outputs
- Zone omit facility on exit
- Auto re-arm after bell time out with automatic zone omit
- Non volatile memory (NVM) for backup of codes and system
programming
- 1 Amp power supply
- 6 Amp-hour battery supply
NB Your Installation Engineer will have programmed all the system features to ensure
easy and convenient day-to-day use of your system. (See section 5 `Engineer
Programmable Zones)
RDOC147Lissue3