Installation
Installing SANsurfer Management Tools
2-4 FC0054606-00 A
S
SANsurfer FC HBA Manager requires that you select the download link to the
package for your operating system, either from an installation CD or the QLogic
Web site.
To install SANsurfer FC HBA Manager on VMware:
1. Go to the QLogic Driver Downloads / Documentation page at the following
URL:
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/default.aspx
2. Click the by Operating System button, and then select Fibre Channel
HBAs, VMware, and VMware ESX/ESXi, as shown in Figure 2-2.
Figure 2-2 Downloading SANsurfer FC HBA Manager—VMware
3. Click Go.
4. Under Management Tools, click SANsurfer FC HBA Manager (x86/x64).
5. On the End User Software License Agreement page, click Agree.
NOTE:
The qlremote agent requires a service called portmap running on the ESX
host. To turn on the portmap service, execute the following commands on
the ESX Server Console:
# chkconfig firewall off
# chkconfig iptables off
# chkconfig -level 3 portmap on
# service firewall restart
# service iptables restart
# service portmap restart
To Next Page
Loading...
Need help?
General
