Configuration
Verifying That the Driver is Loaded
FC0054606-00 A 3-5
A
Verifying That the Driver is Loaded
Follow this procedure to ensure that the QLogic FC adapter driver is loaded on the
ESX system
To verify that the QLogic FC adapter driver is loaded:
1. Log in to the service console as root user.
2. Execute the following command:
# esxcfg-module -l | grep qla2300
Depending on the ESX Server version, the listed module will be one of the
following:
qla2300_707 on ESX 3.0.x
qla2300_707_vmw on ESX 3.5 and later
Figure 3-3 shows an example of the output. For proper operation, ensure
that the QLogic driver shows as Enabled Loaded.
Figure 3-3 Verifying That the Driver is Loaded
To Next Page
Loading...
Need help?
General
