B – Command Line Interface
Show Perf Command
59225-00 B B-85
A
Show Perf Command
Displays port performance in frames/second and bytes/second. If you omit the
keyword, the command displays data transmitted (out), data received (in), and
total data transmitted and received in frames/second and bytes per second.
Authority None
Syntax show perf
byte
inbyte
outbyte
frame
inframe
outframe
errors
Keywords byte
Displays continuous performance data in total bytes/second transmitted and
received for all ports. Type “q” and press the Enter key to stop the display.
inbyte
Displays continuous performance data in bytes/second received for all ports. Type
“q” and press the Enter key to stop the display.
outbyte
Displays continuous performance data in bytes/second transmitted for all ports.
Type “q” and press the Enter key to stop the display.
frame
Displays continuous performance data in total frames/second transmitted and
received for all ports. Type “q” and press the Enter key to stop the display.
inframe
Displays continuous performance data in frames/second received for all ports.
Type “q” and press the Enter key to stop the display.
outframe
Displays continuous performance data in frames/second transmitted for all ports.
Type “q” and press the Enter key to stop the display.
errors
Displays continuous error counts for all ports. Type “q” and press the Enter key to
stop the display.
To Next Page
Loading...
Need help?
General
