B – Command Line Interface
Commands
59225-00 B B-7
A
The command set performs monitoring and configuration tasks. Commands
related to monitoring tasks are available to all account names. Commands related
to configuration tasks are available only within an admin session. An account
must have Admin authority to enter the Admin Start command, which opens an
admin session. Refer to the “Admin Command” on page B-8.
The commands and their page numbers are listed in Table B-2.
Table B-2. Commands Listed by Authority Level
Monitoring Commands Configuration Command
Help
History
Ping
Ps
Quit
Show
Show Config
Show Log
Show Perf
Show Setup
Uptime
Whoami
(B-20)
(B-21)
(B-28)
(B-29)
(B-30)
(B-62)
(B-77)
(B-81)
(B-85)
(B-87)
(B-94)
(B-98)
Admin (B-8)
Admin Session Commands
Alias
1
Config
1
Create Support
Date
1
Feature
1
Firmware Install
Hardreset
Hotreset
Image
Lip
Passwd
Reset
Set
1
Set Config
Set Log
Set Port
1
Set Setup
Shutdown
Test
User
1
2
Zone
1
Zoneset
1
Zoning
1
1
Some keywords do not require an Admin session.
2
Some keywords can be executed only by the Admin account name.
(B-9)
(B-11)
(B-14)
(B-16)
(B-17)
(B-18)
(B-19)
(B-22)
(B-23)
(B-26)
(B-27)
(B-31)
(B-37)
(B-40)
(B-51)
(B-55)
(B-57)
(B-90)
(B-91)
(B-95)
(B-99)
(B-103)
(B-106)
To Next Page
Loading...
Need help?
General
