1 – Introduction
Communications Statements
59265-00 A 1-5
A
CE Statement
The CE symbol on the equipment indicates that this system complies with the
EMC (Electromagnetic Compatibility) directive of the European Community
(2004/108/EC) and to the Low Voltage (Safety) Directive (2006/95/EC). Such
marking indicates that this system meets or exceeds the following technical
standards:
EN 60950-1:2001 – “Safety of Information Technology Equipment”.
EN 55022:2006 Class A – “Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment”.
EN 55024:1998, A1:2001, A2: 2003 – “Electromagnetic compatibility -
Generic immunity standard Part 1: Residential commercial, and light
industry.”
EN 61000-4-2: 1995, A1:1998, A2: 2001 – “Electrostatic Discharge
Immunity Test”
EN 61000-4-3:2002 – “Radiated, Radio-Frequency, Electromagnetic
Field Immunity Test”
EN 61000-4-4:2004 – “Electrical Fast Transient/Burst Immunity Test”
EN 61000-4-5:1995, A1:2001 – “Surge Immunity Test”
EN 61000-4-6:1996, A1:2001 – “Immunity To Conducted
Disturbances, Induced By Radio-Frequency Fields”
EN 61000-4-8:1993, A1:2001 – "Power Frequency Magnetic Field
Immunity Test”
EN 61000-4-11 Second Edition: 2004 – “Voltage Dips, Short
Interruptions And Voltage Variations Immunity Tests”
EN 61000-3-2:2000 A2 :2005 – “Limits For Harmonic Current Emissions
(Equipment Input Current Less Than/Equal To 16 A Per Phase)” Class A
EN 61000-3-3: 1995, A1:2001 – “Limitation Of Voltage Fluctuations And
Flicker In Low-Voltage Supply Systems For Equipment With Rated Current
Less Than Or Equal To 16 A”
To Next Page
Loading...
Need help?
General
