QRP Labs 10W HF Linear PA User Manual

10W HF Linear PA kit assembly 1.00 20
3.14 Install resistors R201, R216 and R217
These are 220-ohm resistors with colour code red-red-black-black-brown. Be careful with the
identification of resistors on this PA PCB because lots of them start with colour code red-red.
3.15 Install resistors R207 and R208
These are 2.2-ohm resistors with colour code red-red-black-silver-brown.

QRP Labs 10W HF Linear PA Specifications

General

Brand	QRP Labs
Model	10W HF Linear PA
Category	Amplifier
Language	English