GNSS Module Series
L76_Series_EVB_User_Guide 17 / 31
Step 4: Click the “Connect or disconnect” button. After connecting the module, the interface as
shown in the figure below.
Figure 8: QGNSS Interface (Connected)
5.1.1. Interface Explanation
You can view GNSS information, such as CNR info, time, position, speed, and precision in the QGNSS
interface. To find out more about these parameters, see the following table.
Table 4: Explanation of QGNSS Interface
This sky view interface shows the satellite position of the satellites
in use. The left column icons show the satellites in use and their
numbers.
⚫ BDS (BeiDou): 4
⚫ GLO (GLONASS): 0
⚫ GPS: 11
⚫ GAL (Galileo): 0
⚫ QZSS: 0
⚫ NavIC: 0
⚫ SBAS: 0
The grid map on the right shows the position of the satellites in
use.
To Next Page
Loading...
Need help?
General
