Quectel L76 Series User Manual

GNSS Module Series
L76_Series_EVB_User_Guide 8 / 31
1 Introduction
This document provides info on the steps needed to evaluate the Quectel L76 series modules using the
Evaluation Board (EVB). The EVB is a reference tool that allows you to become familiar with the L76 series
modules.
Specifically, the document is divided into several sections:
⚫ Chapter 2 provides the general overview of EVB Kit accessories.
⚫ Chapter 3 describes the EVB user interfaces.
⚫ Chapter 4 describes how to communicate with a module by using the QCOM tool;
⚫ Chapter 5 describes how to test the module by using the QGNSS tool;
⚫ Chapter 6 describes how to upgrade firmware of the module by using the QGPSFlashTool;
⚫ Chapter 7 is an appendix, which summarizes the relevant documents, terms and abbreviations
appearing herein.
In this document, Quectel L76 series includes L76, L76-L and L76-LB modules. For the EVB user guide of
L76-L (L) and L76-LB (L) modules, see document [4].
⚫
If you need EVB schematic and PCB layout design files for reference, request them from Quectel Technical
Supports (support@quectel.com).
NOTE

Quectel L76 Series Specifications

General

Brand	Quectel
Model	L76 Series
Category	Control Unit
Language	English