GNSS Module Series
L76&L76-L_Hardware_Design 3 / 57
Safety Information
The following safety precautions must be observed during all phases of operation, such as usage, service,
or repair of any terminal or mobile incorporating the module. Manufacturers of the terminal should notify
users and operating personnel of the following safety information by incorporating these guidelines into all
product manuals. Otherwise, Quectel assumes no liability for customers’ failure to comply with these
precautions.
Ensure that the product may be used in the country and the required environment,
as well as that it conforms to the local safety and environmental regulations.
Keep away from explosive and flammable materials. The use of electronic
products in extreme power supply conditions and locations with potentially
explosive atmospheres may cause fire and explosion accidents.
The product must be powered by a stable voltage source, and the wiring shall
conform to security precautions and fire prevention regulations.
Proper ESD handling procedures must be followed throughout the mounting,
handling and operation of any devices and equipment that incorporate the module
to avoid ESD damages.
To Next Page
Loading...
Need help?
General
