Quicksilver 855WE User Manual

Quicksilver 855WE — Electrical Systems
59
Fuses and breakers
ATO/ATC fuse Thermal breaker ANL fuse Magnec breaker
NOTE: Never operate or turn o the baery switch when the engine is running as it may cause
damage to electronic components on the boat. Always operate the switch with the engine and
accessories o.
5. Fuses and Breakers
Your boat will either have fuses or breakers protecng the DC electrical system. If you have to replace
a fuse or electrical breaker, replace only with a fuse or breaker of the same rang. The amperage will
be marked on the fuse or breaker, and it is recommended that you carry spare fuses or breakers.
If a fuse or breaker is replaced with one that has a lower amperage, it may not be sucient to carry
the electrical load of the equipment it is connected to and will cause nuisance failures. If a fuse or
Twin Engine Boat
On a twin engine installaon, there are two baery switches to control select items. One switch
provides power to both the port engine and generator, if applicable. The second baery switch
provides power to both the starboard engine and house electrical. To turn on power, rotate the
switch clockwise 90 degrees to the ON posion. If needed, there is a third baery switch that allows
power from both baery banks for emergency starng. To ulize, rotate the switch clockwise 90
degrees.
Twin Engine Baery Switch Operaon
OFF Posion ON Posion
Combine Baeries (center switch)
Single Engine Baery Switch Operaon
OFF Posion Baery #1 On Baeries #1 & #2 On
Engine / Generator / House Switch
Baery #2 On

Quicksilver 855WE Specifications

General

Brand	Quicksilver
Model	855WE
Category	Boat
Language	English