Quicksilver 555OP — General Informaon
9
Bilge pump
Navigaon lights
Anchor light
12. Navigaon Lights
Your boat comes equipped with navigaon lighng for use at night or in low visibility condions. Prior
to running at night, you must install the stern pole light into the socket located on the transom. There
are two switches, located at the helm switch panel, that control the navigaon lights. To turn on the
Navigaon lights, push the upper part of the second switch forward to illuminate the all around light
(white), and push the upper part of the third switch forward to illuminate the port (red), starboard
(green) bow lights showing other vessels that you are underway. To turn on the Anchor light, only
push the upper part of the second switch illuminang the all around light (white), leng other boaters
know that you are anchored at a given locaon.
The Internaonal Regulaons for Prevenng Collisions at
Sea (COLREG) and the rules of the road require that a
proper lookout be maintained at all mes and observance
of right of way be respected. Always be certain to have
sucient distance to stop or manoeuver if required to avoid
collisions.
Dash Switch Panel
112.5
o
Port Navigaon
Light (Red), visible 2NM
360
o
All Around Light
(White), visible 2NM
All around light stored in a seat
base
112.5
o
Stbd Navigaon
Light (Green), visible 2NM