Quicksilver Activ 555 User Manual

24
Quicksilver 555OP — System & Component Overview and Operaon
Ski pylon
Deck plate
Stern eyes
Ski pole base
Ski Pole
14. Leaning Post (oponal)
The standard conguraon for helm seang is two bucket seats, however your boat can also be
equipped with an oponal leaning post with storage. The leaning post consists of a leaning post base,
a leaning post lid, cushion, and footrests. Located inside on the port side of the leaning post storage is
a 12v 17L electric cooler. The cooler is protected by a breaker located next to the baery switch panel
in the cockpit.
Leaning post lid
Leaning post base
Footrest
Leaning post cushion
12v electric cooler
Breaker panel
Leaning Post
15. Ski Pole (oponal)
Your boat may come equipped with an oponal ski pole for water skiing. To use, remove the ski pole
deck plate, located on centerline in front of the motorwell. The ski pylon slides into the deck plate and
connects to the ski tow base, located in the bilge.
The ski tow deck plate has rubber O-ring gaskets to minimize the amount of water that could
potenally enter the bilge. Quicksilver® suggests that prior to installing or removing the ski pylon,
spray water on the ski pole to help slide it through the deck plate.

Quicksilver Activ 555 Specifications

General

Brand	Quicksilver
Model	Activ 555
Category	Boat
Language	English