EasyManuals Logo
Home>Quooker>Water Filtration Systems>CUBE

Quooker CUBE User Manual

Quooker CUBE
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
31
CUBE Settings
The CUBE display is a touchscreen consisting of three buttons. The left and right
buttons generally allow you to navigate through the menu. You use the middle
button to conrm the selection. You will hear a short beep when you press a
button. A number of settings can be adjusted using the display. A number of
examples are included below.
Status of the CO
cylinder and lter
Click on the Settings icon on the right of the screen (Figure 1) and navigate to the
topic about which you need more information. The display then shows the status
of your CO
cylinder and lter (Figure 2).
When the CO
cylinder is almost empty, the status bar on the last block ashes.
If the lter is saturated, the CUBE displays a message on the display and emits a
beeping signal. You can easily order a new lter or set of four new CO
cylinders
through your account at quooker.hk. If you have replaced one of the two, go
to this topic on the display and click on CO
or lter. The CUBE will then ask
you whether you have replaced the cylinder or lter. After your approval, the
counter restarts.
Set eervescence level
You can set the eervescence level at ‘Settings' (Figure 3). Choose a CO
content of 100% or 50% by pressing it. A checkmark is now displayed next to
the chosen eervescence level.
Set language
You can easily switch between languages by clicking on ‘Settings' (Figure 3) and
then on ‘language’. Click on the desired language. A checkmark is now displayed
next to the chosen language.
Switch o the CUBE
If you go on holiday for longer than two weeks, it is cheaper to switch o your
CUBE. You use the display to do this. Press and hold down the power button on
the home screen (Figure 1) for 1.5 seconds. For more information, read the tips for
use of the CUBE that are included with this manual. To switch the CUBE back on,
press and hold the on/o button for 1.5 seconds until the Quooker logo appears.
When you return home, it is important to ush both water ows. Flush around
1 litre of chilled water and 1 litre of sparkling water once.
(optional)
Fig. 1
Fig. 2
Fig. 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quooker CUBE and is the answer not in the manual?

Quooker CUBE Specifications

General IconGeneral
BrandQuooker
ModelCUBE
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals