5
How the Quooker CUBE works
This manual is based on a Quooker system that has
already been installed. For instructions on how to install the
Quooker tank and the tap, see the manual that is included
with the Quooker tank.
With the Quooker CUBE, besides cold, warm and boiling
water, you can now also dispense chilled sparkling
and ltered water from the Quooker tap. The Quooker
CUBE can only be used with Quooker taps and tanks
manufactured after October 2017. You can recognise
them by the serial number. Only tanks with a serial number
with a W in it or starting with an R and taps with a serial
number with a W in it or starting with a T can be used in
combination with a CUBE.
The light ring emits a constant red light when boiling water
is being dispensed or when the tank is warming up. The ring
lights up blue when chilled ltered water is being dispensed
and ashes blue when sparkling water is being dispensed.
There is a lter connected to the Quooker CUBE. This
Quooker lter contains a Hollow Fibre lter and an Active
Carbon lter that together ensure even better water quality.
The Quooker CUBE has a Quooker CO
₂
cylinder that is
lled with enough carbon dioxide to provide approximately
60 litres of sparkling water. The CUBE keeps 0.6 litres of
sparkling water and 1.6 litres of chilled water in stock. After
dispensing the sparkling water, the CUBE is topped up with
cold tap water.
Note: To ensure good water quality, the water stored in the
CUBE should be completely refreshed when no sparkling
or chilled water has been dispensed for fourteen days or
more. Quooker then recommends that you ush both the
sparkling and chilled water for ve minutes. This rells the
CUBE tank with fresh water and guarantees optimum water
quality. The temperature of the sparkling and chilled water
cannot be set.
Only Quooker CO
₂
cylinders can be used, as they have
been specially developed for the Quooker CUBE. This
enables us to guarantee the quality of the sparkling water
and the safety of the product. When all the water has
been drained from the CUBE's water supply, it will take
approximately 30 minutes before the sparkling and chilled
water has chilled down completely.
Installation, maintenance and warranty
To install the CUBE, it must be possible to connect to the
water mains and you need a free 13 amp power socket.
The CUBE is supplied with a connection set, including the
CO
₂
pressure reducing valve and the CO
₂
cylinder. It is not
permitted to connect the CUBE and the Quooker tank to a
reverse osmosis installation or a water softener with a pH-
lowering eect. Quooker recommends that you clean the
fan every year with a brush or vacuum cleaner.
The warranty period for the CUBE and the Quooker system
is two years and the warranty only covers the supply of
parts. It does not cover labour costs or mechanical failures
due to limescale. Only original Quooker parts may be used
with a Quooker system and the use of third party parts of
any kind will invalidate the warranty. Register your Quooker
system at quooker.hk/register to obtain this warranty.
Do you have any questions?
If the answer to your question is not on our website,
please contact us using the service contact form at
quooker.hk/register or call +852 2386 6326.
Practical background information
To Next Page
Loading...
Need help?
General
