Quooker CUBE User Manual

6
Installation requirements
Positioning the CUBE
Make sure the CUBE has enough space. When installing
the CUBE, remember that it must be easy to access for
service and maintenance. In addition, at least 10 cm must
be kept free at the back of the CUBE to allow warm air to
ventilate. We recommend that you leave at least 2 cm extra
space on both sides. The CUBE must be positioned within
70 cm of the Quooker tank.
Ventilation in the kitchen cupboard
For optimal operation of the CUBE, it must be possible to
properly ventilate the kitchen cabinet in which it is installed.
An opening of approximately 20 × 20 cm (400 cm²) must
therefore be made in the rear panel or an equivalent
opening in the base plate starting at 5 cm from the bottom
of the cabinet (at the height of the fan).
Extra socket
A 13 amp power socket is required to install the CUBE.
The CUBE requires 100W of power. Only use the supplied
detachable power cable. If the power cable is damaged, it
must be replaced with an identical power cable. Contact
Quooker for a replacement cable.

Quooker CUBE Specifications

General

Brand	Quooker
Model	CUBE
Category	Water Filtration Systems
Language	English