10
4.2. Unpacking
Carefully remove the balance from its packaging, remove the plastic and foil
wrapping and gently. Install the weighing pan, and other elements according to
below schema:
The balance with Φ 70 mm pan:
- open side doors of weighing chamber,
- inside the chamber place lower shield of
weighing chamber (1),
- put anti-breeze shield (2) on the lower
shield,
- put centering ring (3) on the lower
shield,
- put the balance pan (4) inside the ring,
- close side doors of weighing chamber,
- turn on balance supply,
- pin of power adaptor should be
connected to socket in the back of
balance casing.
To Next Page
Loading...
Need help?
General
