RADWAG AS series Operating Instruction

20
Possibilities of choice:
• For EC verified balances, user can choose following units: [g], [mg], [ct]
• For non-verified balances, user can choose following units: [g], [ct], [mg],
[oz], [ozt], [dwt], [t], [mom], [gn].
Go back to weighing mode with procedure of saving changes
(see point - 7.1.2. – return to weighing).
ATTENTION:
Balance after switching on will start with set basic unit.
8.2. Choice of weighing unit (temporary)
Function enables choice of unit with which mass on the pan will be indicated. Unit
will be valid until change of unit or switching on and off the balance. Each
pressing the Units key, causes change of measuring unit.
Possibilities of choice:
• For EC verified balances, user can choose following units: [g], [mg], [ct]
• For non-verified balances, user can choose following units: [g], [ct], [mg],
[oz], [ozt], [dwt], [t], [mom], [gn].
8.3. Setting accessibility of balance operating modes
In this group of parameters user declares functions which are to be accessible for
user after pressing F key.
Enter group P6 Func.

RADWAG AS series Specifications

General

Brand	RADWAG
Model	AS series
Category	Scales
Language	English