RADWAG AS series Operating Instruction

74
19. ADDITIONAL EQUIPMENT
19.1. Vibration damping table
Thanks to this stable base all vibrations are eliminated.Inside of
table marble plate is installed which makes foundation for balance.
19.2. Rack for weighing load under balance
It is used when weighing under balance is neccesary. It is usefull
for magnetic load or when thickness of products is defined.
Racks are used also during tests for absorptiveness of materials
e.g. absorptiveness of foamed polystyrene. Structre of rack is
made of steel. Rack is 330mm high.
19.3. Set for defining thickness of solids and liquids
It’s appropriate for weighing with precision 1mg. It enables to
define thickness solids and liquids. This procedure is fully
automatically user only puts samples on weighing pans.
19.4. Additional display
Characteristics: Length of conductor between additional display
and balance – 1,5m, plastic casing, possibility of bending the
display.
19.5. Computer software
PW-WIN 2004 – gathering data from any balance made by RADWAG.
RAD-KEY 2000 – enables to introduce result of weighing to Exel.
REC-FS 2000 – making mixtures. It has its own programmed contents
base according to recipes are made.
Number of instruction:
LMI-16-05/03/09/ENG

RADWAG AS series Specifications

General

Brand	RADWAG
Model	AS series
Category	Scales
Language	English