Rys. 58 Przykład wydruku standardowego
A question mark (?) preceding the mass of a measured load on a printout indicates that the
result was unstable.
19.2. Non-standard printouts
Principles of creating non-standard printout templates:
− balance enables creating up to 4 custom printout templates,
− each template must have the string of text start and end specified, e.g. Printout
no. 1 Start – 1 and Printout no. 1 Stop – 40. In this case the Printout no. 1
contains text strings from 1 to 40.
− Next insert the texts into the specified text strings, i.e. 1 ÷ 40.
it is recommended to use an external computer keyboard connected to balance’s
port. This means of text input is much simpler and quicker.
− Non-standard printout templates may overlap each other, i.e.:
Printout 1 Start – 1
Printout 1 Stop – 40
Printout 2 Start – 20
Printout 2 Stop – 40
Non-standard printout templates are easily created using printout editing option.
Caution: while text input it is necessary to add all required special signs, such as CRLF,
tabulator, etc. When using printout editing option, all of the special signs are selectable
from available menu. they are grouped on the one side of text editing option, and
included in a printout by adding them to the field Printout.
Fig. 59. Menu Printouts – mode activating
To Next Page
Loading...
Need help?
General