Appendix A
Technical Specifications
Scope of these Specifications
This appendix contains technical specifications for the major link components appearing in
this User Manual. They are correct at the date of publication, but are intended for general
background only. The latest authoritative and most up to date technical specifications are
available as Data Sheets obtainable from RADWIN Customer Service.
In any event, RADWIN reserves the right to change these specifications without notice.
ODU - HBS and HSU
100Mbps aggregate net throughput full duplex, hardware ready for 200Mbps
2x2 MIMO-OFDM (BPSK/QPSK/16QAM/64QAM)
Adaptive Modulation & Coding
Automatic Channel Selection
FEC k = 1/2, 2/3, 3/4, 5/6
Rate – Dual Antenna [Mbps]
Max Tx Power [dBm] for 5.8 – GHz
Max Tx Power [dBm] for 5.4 – GHz
Max Tx Power [dBm] for 4.9 – GHz
Sensitivity (dBm) @BER <10e-11
(20MHz)
Occupied
Frequency range
[GHz]
FCC 47CFR, Part 15, Subpart C and IC RSS-210
FCC 47CFR, Part 15, Subpart E