The Activation process is covered in detail in Chapter 5.
At any time, the current status of the HBS is shown in the Sector Status Panel, Figure 4-10.
HBS Events Log
The Events Log records system failures, loss of synchronization, loss of signal, compatibility
problems and other fault conditions and events.
Note
The foregoing event types include events from all links for which this
managing computer has been defined as the traps address. Only events
from RADWIN equipment will be shown.
Alarms (traps) are displayed in the Events Log in the lower panel of the main window. The
Events Log may be saved as a text file.
The Events Log includes the following fields:
» Sequential number (ID)
» Date and time stamp
» Message
» Trap source
» IP address of the ODU that initiated alarm.
For complete information about traps and alarms see Appendix E.
The events are displayed in the Events Log in the lower right-hand panel of the RADWIN
Manager main window:
Figure 4-12: Events Log panel
The events log provides a color coded event list. Green items (like the one in Figure 4-12)
are informational. You can set the color coding for critical, cautionary and informational mes-
sages from the Preferences button
To Next Page
Loading...
Need help?
General
