6 Transducers for Fishfinders
1.3 Unpacking and Inspecting the Components
Unpack your system carefully, to prevent damage to the equipment.
Save the carton and packing, in case you need to return a unitfor
service.
Check that you have all the correct system components. These
depend on your system package, asfollows:
1
E66023 fairings are required for installing E66020 and E66029 bronze thru-hull
transducers.
2
E66045 fairings are required for installing E66043 stainless steel thru-hull
transducers.
Note:This information wascurrent as of the date thishandbookwas
printed. Check with your dealer for the most current list of parts and
accessories.
1.4 Selecting the Equipment Location
Transducer Mounting Location
It is very important that you mount the transducer correctly. The
transducerprovides themost reliable readings if it looks into water
that is smooth and undisturbed.
Table 1-2:Parts and Accessories
Item
Part
No.
Supplied
with:
Option
for:
Transducer (
see Table 1-1 on page 4)
— — All
Transducer cable, 10 ft (3 m) extension
Transducer cable, 18 ft (5 m) extension
Transducer Y Cable
E66009
E66010
E66022
—
—
Speed/Temp
Transducers
All
All
All others
High Speed Fairing
E66023
1
E66045
2
E66025
E66034
E26017
—
—
—
—
—
E66020, E66029
E66043
E66024
E66033
E66035
To Next Page
Loading...
Need help?
General