Chapter 1: Overview 3
The following illustration showsa typical range of suppression
ferrites fitted to Raymarine equipment.
Connections to Other Equipment
If your Raymarine equipment is to be connected to other equipment
usingacablenotsuppliedbyRaymarine,asuppressionferriteMUST
always be attached to the cable near to the Raymarine unit.
1.2 The Fishfinder System
Transducers enable fishfinders to display depth, water temperature
and/or speed, depending on the type of transducer(s) installed.
Beforeyou start the installation, check that you have the correct
transducer for your application, as described below in Selecting the
Correct Type of Transducer.
D3548-3
To Next Page
Loading...
Need help?
General