54 Ray54E VHF Radio
2. Rotate the CH knob until the arrow points to CALL LOG.
3. Push in the CH knob to select the Call Log. Entry 01 appears first with call
type and time of the last call. This is the most recent call.
4. Using the CH knob, scroll down the list of up to 20 entries.
If the caller had requested a change to an unsupported working channel, UC
appears in the Channel Number field, indicating the radio was Unable to
Comply with the channel change request.
Making a Call from a Call Log Entry
You can make a routine Individual Call to any caller listed in the log.
1. Rotate the CH knob until the log entry you wish to call appears.
2. For received Individual or All Ships Call, push the CH knob. The Individ-
ual Call screen appears addressed to the caller.
3. Follow the same directions you would for initiating an Individual Call
using the Phonebook, as outlined on page 34.
4. To make a Group Call using the Call Log, push the CH knob to bring up
the Group Call menu and make the call as described in Transmitting a
Group Call on page 5-38.
To Next Page
Loading...
Need help?
General
