Chapter 6: Menu Settings 69
6.7 Radio Setup
The Radio Setup menu item is used to determine four separate settings:
• Frequency Band
• Channel Name
• Ring Volume
•Key Beep
➤ To adjust these settings:
1. Press and hold the CALL/MENU key to enter Menu mode.
2. Rotate the CH knob to scroll down the list until the arrow points to RADIO
SETUP.
3. Push the CH knob to accept. The Radio Setup screen appears.
Make your selection from the options on the list, described as follows.
Band
The Ray54E can transmit and receive all USA, International and Canadian
frequencies, if available. This setting determines which channel set is being
used. The appropriate indicator is illuminated in the LCD: U for US, I for
International, or C for Canadian channel sets.
To Next Page
Loading...
Need help?
General
