vi ST40 Bidata Instrument Owner’s Handbook
Parts supplied
D4730-2
ST40
Bidata
Instrument
Owner's
Handbook
Worldwide
Distributors
ST40 Bidata instrument
Gasket
Retractable speed transducer
Supplied with bung
(not illustrated)
1 m (3 ft) power cable
Instrument Cover
Owner’s Handbook.
Warranty document and fitting
templates included in Handbook
Worldwide Service Centre
Handbook.
Quick Reference Guide
Clamping bracket
BIDATA
ST40
Depth transducer
Note:
The items shown here are supplied for an ST40 Bidata system. If an instrument is purchased separately, transducers
are not included. If any item is not present, contact your Raymarine Dealer.
Fixing
stud
Thumb
nut
Adjusting display backlighting/contrast
Normal operation
ST40 Bidata Instrument - quick reference guide
orTo exit adjust mode press or wait for 5 second timeout
LEVEL 1
LEVEL 1
OFF LEVEL 2LEVEL 3LEVEL 2
To enter adjust mode, press for 1 second to adjust BACKLIGHTING and a further 1 second to adjust CONTRAST
SWITCH ON
Last permanent
screen is displayed
SPEED
DEPTH
Current
speed
3 seconds
Reset
Maximum
speed
3 seconds
Reset
Average
speed
Water
Temp.
Log
Trip
3 seconds
Reset
Depth
Minimum
depth
Shallow
alarm
Deep
alarm
Deep
anchor
alarm
Offset
Shallow
anchor
alarm
3 seconds
Alarm on/off
3 seconds
Alarm on/off
Set
alarm
level
3 seconds
Alarm on/off
3 seconds
Alarm on/off
+
-
Notes:
*
denotes temporary screens
which will time-out to the previous
permanent screen after 5 seconds.
On repeater instruments, on;ly the
Speed, Water temperature,
Depth and Minimum depth
screens are available.
With Set alarm level screen displayed,
to save the alarm level and return to
normal operation.
and keys simultaneously
press the
159_2pre.p65 01/05/01, 15:146