Set the Time and Date
REW (Rewind)/REVIEW
CAMERA/OFF/VCR [
DATE/TIME
F.FWD (Fast Forward)
STOP/EJECT
.
.
.
Attach a power supply (battery or
adapter/charger) to the camcorder.
Press and hold the small button on
CAMERA/OFF/VCR and place in
CAMERA.
Press DATE/TIME to display the date
and time in the viewfinder. A flashing
cursor lets you know which part of
the display you are setting.
Note: If flashing cursor does not appear,
press and hold DATEZI'IME and then press
STOP/EJECT.
,I_:OOAM
I/ 1/1997
/I\
4. Repeatedly press F. FWD or
REW/REVIEW until correct month
appears. Press and hold the button to
advance the digits faster.
26
5. When the correct digit is displayed,
press STOP/EJECT. The cursor will
move to the next part of the display.
6. Repeat steps 4 and 5 to set the correct
month, day, year, hour, minute(s), and
AM/PM.
7. After setting AM or PM, press
DATE/TIME to remove the flashing
cursor and start the internal clock.
To Correct the Date or Time
To correct the date or time, press and
hold DATE/TIME and then press
STOP/EJECT. The display will appear in
the viewfinder along with the flashing
cursor. Use F.FWD and REW/REVIEW to
correct the time or date. Press
DATE/TIME to remove the flashing
cursor and start the clock.
To Next Page
Loading...
Need help?
General
