Audio Dubbing (Connection for Model CC439 Only)
This illustration which applies to the model CC439 shows how to connect an audio
device to model CC439 camcorder using the AUDIO 0 UT j acks. Audio dubbing
operation is explained on the following page.
m
A V DUB Button
A V OUT/IN Switch_
(This switch applies
to CC439 only.)
r--AUDIO --1
IN OUT J]
VCR or Tape Deck '"_ ..... " '
_, Audio/Video Cable White _,J
........_ '_:_ ........ xeilow
Yellow Video Plug Video Plug
(No connection)
f---AUDIO "--'1
R IN L R OUTL
@@@@
Back of stereo
VCR, Tape Deck,
Laser Disc Player
or CD Player
-OR-
(no connection)
White
Audio Plug
Yellow
Video Plug
no connection)
White Audio Plug
Y-Adapter
(such as AH25)
Audio/Video Cable
(such as VH83)
Yellow Video Plug
(No connection)
Note: You will need an optional audio/video cable, such as VH83 shown on page 60. If the
audio source has separate left and fight outputs, attach the audio plug to the one labeled MONO.
If one is not labeled MONO, you may need a Y-adapter, as shown on page 60, to record audio
from both the left and right channels.
38
To Next Page
Loading...
Need help?
General
