Customizing the Function Settings
4. Press the / button to adjust
the settings, then press the
ENTER button to confirm.
5. Repeat steps 3 and 4 to adjust
other options. Press the
button to return to the previous
menu.
6. Press the SETUP or RETURN button to exit the menu.
TV Display
Pan Scan
• Whenwide-screenvideoisplayed,this
mode clips the right and left sides of
the image so that it can be viewed on
a conventional screen.
• Somewide-screenDVDs thatdonot
permit Pan Scan mode playback are
automatically played in letterbox
mode (black bands that appear at the
top and bottom of the screen).
Letter Box
• Whenwide-screenvideoisplayedin
this mode on a conventional screen,
black bands appear at the top and
bottom of the screen.
Wide Screen
• Thisisthecorrectmode forplaying
wide-screen videos on the unit screen
or other external wide-screens.
Notes:
• The displayable picture size is preset
on the DVD. Therefore the playback
pi c t u re of so m e DV D s m ay n o t
conform to the picture size selected.
• When you playDVDsrecorded inthe
4:3 aspect ratio, the playback picture
will always appear in the 4:3 aspect ratio regardless of the TV display
setting.
• SelectWideScreentoconformtheLCDscreenontheunit.Always
be sure that your TV display conforms to the actual TV in use if you
connect the unit to a TV.
Default
It takes 3-5 seconds to reset the DVD settings to the factory default.
Cut off when a wide-screen
video image is played.
Pan Scan
Letter Box
Wide Screen
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop
out during playback.
Handle the disc by holding its inner and outer edges.
• DoNOTtouchthesurfaceoftheunlabeledsideofthedisc.
• DoNOTstickpaperortapeonthesurface.
• DoNOTexposethedisctodirectsunlightorexcessiveheat.
• Cleanthediscbeforeplayback.Wipethedisc
from the center outward with a cleaning cloth.
• NEVERusesolvents suchasbenzineoralcohol
to clean the disc.
• DoNOTuseirregularshapeddiscs(example:heartshaped,
octagonal, etc.). They may cause malfunctions.
Cleaning the Unit
• Besuretoturntheunitoffanddisconnect theACpoweradapter
before cleaning the unit.
• Wipetheunitwithadrysoftcloth.If thesurfacesareextremely
dirty, wipe clean with a cloth that has been dipped in a weak soap-
and-water solution and wrung out thoroughly, then wipe with a dry
cloth.
• Never usealcohol,benzine, thinner, cleaningfluidorother
chemicals. Do NOT use compressed air to remove dust.
Important Note
• Beforetransporting theunit,removethe disc fromthe disc
compartment.
Sound System
Dolby Digital
Dolby Digital is a technology developed by Dolby Laboratories.
Soundtracks encoded in Dolby Digital can reproduce from one to 5.1
discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and
provides a downmix suitable for two-channel listening. An additional
Dolby Digital decoder is required for reproduction of the discrete multi-
channel soundtracks available on many DVDs.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
Maintenance
Carrying Bag Installation
CAUTIONS:
1. Do not use this DVD player case as a swing, car seat, or for any other
purpose except to hold a DVD player and accessories.
2. The DVD player case is intended for viewing only from the rear
seats. Do not install or use this product in the front seat of a vehicle.
3. To reduce the chance of injury in case of a collision or sudden stop:
• AlwayskeepDVDplayerstrappedsecurelyinsidecasewhilevehicle
is moving.
• AlwayskeepDVDplayercasesecurelyattachedinsidevehiclewhile
the vehicle is moving.
4. Always position the plastic hooks and strap adjustment slider so that
they do not touch the back of the head of the person in the front seat.
To Attach the DVD Player Case to a Headrest (Images 1 & 2)
1. Insert the DVD player into the case as
shown right (1, 2, 3).
2. Unzip the main compartment that holds
the player; locate the D rings at the top of
the case (A).
3. Locate 2 straps with hooks on each end.
4. Hook one end of the each strap to the D
rings at the top of the case.
5. Criss-cross the straps around the front of
the headrest (B) and hook the straps to a
second set of rings on the lower part of
the case (C).
6. Tighten up the straps until the unit is
secured. Connect the 12V car adapter as
shown on the right (D).
Note: Before closing the bag,
release the left and right elastic
bands from the screen panel.